Mini Quadcopter Kit for Drone Racing (3s & 4s Capable)

$ 139.00 $ 159.00

The Most Affordable Mini Quadcopter DIY Kit for Drone Racing

SHIPS SAME DAY BEFORE 330PM PDT!

Live chat support now available.

Watch Our How to Build Video

Instruction Guide Manual 

Pair it with the affordable Taranis X9D Radio and XSR Receiver!

The DIY FPV Racing Mini Quadcopter Kit inludes all parts needed to build your own 250 FPV Racer. This takes RC knowledge, soldering skills, basic tools and supplies, (things you may need are: heat shrink, zip ties, soldering station) and google searches! The quadcopter kit is ideally used for FPV Racing as it's built to take a beating!

Included in the Best DIY Drone Kit:

• 4x Dal 5045 Tri-Props! Buy Extra Props Here

• Naze32 with Breakout Cable (Pre-soldered)

• 4x Your Choice of Mini Quad Motors.

• 4x DYS XM20A ESCs // Add spare ESCs here.

• 1x 5v/12v Filtered PDB

• XT60 connector and 18awg wire for battery connection (Pre-soldered)

• Battery Voltage Monitor

• Lipo Velcro Strap (Random Color)

• ZMR 250 Carbon Fiber Composite FPV Racing Frame Add spare arms here

• Mobius Camera Mount with Vibration Bobbins for Jello Free Video

• FPV Camera Mount. 

• Standoffs for PDB and Flight Controller

All Spare Parts Sold on the Product Page

WHAT ELSE DO YOU NEED TO FLY A DRONE?

• 6 Channel Radio
• 1300mah 4s Lipo
• Basic tools and supplies(think heat shrink, zipties, servo cables), soldering iron, brain power, and google searching!

TBS Vendetta FPV Racer Drone

$ 349.00 $ 500.00

The TBS Vendetta FPV Racer is the best FPV Racing Drone on the market. It's also borderline sexy.

Hello High End Drone Racing, Meet the TBS Vendetta FPV Racer

TBS poured their heart and soul into this drone, edging out the competition in the high end FPV Drone Racing market. It’s aesthetically attractive, with a molded carbon fiber unibody frame that flows so well. Everything is completely modular, meaning you can swap parts very easily, even at the flying field. Meaning you can quickly get back in the air with your friends! This is allowed by the motors, arms, and fpv camera, being replacable without a soldering iron! Each arm has integrated motors and wires, with an MT30 plug to connect to the frame. This means a broken arm can be literally swapped out in seconds. These plug and play removable arms also allow you to break the quad down for travel and maintenance.

The TBS Vendetta is ready to fly in the blink of an eye

The TBS Vendetta FPV Racing Drone comes pre-tuned, and the Calibration Wizard software guides you through the simple setup process. This process is all done via the OSD, no PC required!

Ready for Upgrades

The TBS Vendetta comes with overpowered bulletproof 2-6s 30a/50a ESCs. This allows you to upgrade to a 6s lipo and larger motors when you start craving higher speeds and performance. 

Limit to 4s lipo on stock motors.

TBS Vendetta Features

• 240-sized ARF FPV Racing Drone
• TBS Triumph Antenna
• TBS Core Pro OSD
• TBS Unify Pro vTX
• Quick-swap 3.5mm carbon fiber arms and MT30 connectors to easily swap on new arms and motors
• High end Cobra CM2204/2300kV Motors
• HQ 5x4x3 Tri-Blade Props for maximum thrust
• TBS PowerCube featuring F3 processor. 
• 2-6S lipo capable Bulletproof 30/50A ESCs
• Compatible with all PPM, SBUS, XBUS, Spektrum R/C systems
• Fully configurable via OSD, no PC required, setup using the OSD :)
• GoPro 3/4 and Mobius / Runcam mount included, both 10 and 30 degree variations
• Lost model alarm
• 410g without Battery or HD camera

FrSky Taranis X9D Plus With Aluminum Case

$ 199.00 $ 209.99

The best radio on the market also happens to be the most affordable. Meet the FrSky Taranis X9D Plus, a perfect fit for your mini quadcopter.

Please acknowledge that minor damage to the Aluminum Case may be present due to the conditions of FrSky's shipping containers. 

The Taranis X9D Plus Radio is my only radio recommendation for mini quadcopters due to it's endless customization, astonishing performance, and the massive community support behind it.

This special package comes with a Taranis X9D Plus (battery included) and an Aluminum Case.

Select a receiver option. I recommend the XSR as it is the smallest size, and offers SBUS and PPM

In each package:

• Taranis X9D Plus
• Neck Strap
• Charger
• Battery
• Aluminum Case

Add additional XSR Receivers for your other models here.

Pair the Taranis with a Tyrant 180, Mini Quadcopter Kit, Jabberwocky180 Kit, or a ARF EMAX Nighthawk Pro.

Nighthawk 170 Kit for FPV Racing

Sold Out $ 215.00

The Nighthawk 170 is the smallest quadcopter in the 180 FPV Racing Class

Features:

• 3 mm Pure Carbon Fiber unibody frame for simplicity and durability
• Motor guards with landing skids are included for maximum crash protection
• 20/30 degree FPV Camera tilt options for faster forward flight
• Low-CG battery mounting for more responsive acro flying

Kit Includes:

• Frame: EMAX Nighthawk 170 Frame(3mm)
• Motor: MT2204II KV2600 Cooling Series
• ESC: Nano 20A V2
• Propeller: 4045 BN
• Flight controller: Skyline32-Acro V1.1
• PBD: 5V/12V output
• FPV transmitter: 600mw
• Antenna: LT-5.8G
• Camera: YY3089
• Buzzer For Skyline32
• RGB Light

Runcam PZ0420m 5-17v FPV Camera

$ 17.00 $ 35.00

With the PZ0420m FPV Camera, voltage is rarely a concern as it accepts a wide voltage input of 5-17v (2-4s)

Perfect with the MQB 200mw VTX and Jabberwocky 180 Frame

Does not include 3D Printed mount.

Specs:

5-17v input (2-4s)

28x28 size

Lens: 2.8mm

IR Blocked

2x Aomway 5.8GHz Semi-Rigid FPV Racing Antennas RHCP

$ 14.99 $ 20.00

Built for FPV Racing, the reinforced Aomway 5.8 Antennas are sturdy, tuned, and semi-rigid. Each lobe has plastic supports to withstand even the hard crashes. The coax is RG402 just like the good stuff, accept these come at a fraction of the price.

The Aomway 5.8 Antennas have a standard SMA connector, compatible with SMA VTXs, including the FT952, and ImmersionRC 600mw VTX.

Included:

2x Aomway 5.8 Antennas

Let's talk specifications:

Standard SMA Connector

Right Hand Circular Polarized (RHCP)

RG402 Semi Rigid Coax (same as ImmersionRC Spironet Antennas)

Tyrant 180 PNF v1.1 (NEW) Quadcopter Mini Quad Bros

Sold Out

This is the best product for beginners to Drone Racing, hands down. Just add your receiver and fly!

Drone Racing has been blowing up exponentially in the last year. Every newcomer to the sport needs to start with something affordable, simple, repairable and most importantly, reliable. The Tyrant 180 excels in all these attributes and I can't recommend it enough as the best Drone for Drone Racing, especially for a beginner. 

In stock now

MQB180 Jabberwocky Kit

$ 169.00 $ 180.00

Now offering the Jabberwocky180 starter kit. Everything you need to build the best 180 FPV Quadcopter.

Current Cleanflight CLI Dump for the Jabberwocky 180 with the suggested components.

Please tailor your Jabberwocky kit with the selections on the right :).

Each kit now includes DYS SE 2205 2300kv .

Inspired by polyhedron geometry, the Jabberwocky180 is a cute little frame with a knack for not breaking. It’s true, we did the math

The Jabberwocky180 was designed around the PZ0420m 28x28 size FPV camera and the MQB Raceband VTX, both of these FPV components will fit perfectly into the frame.

Fully protects 22xx size motors and remains the lightest frame in its class to accomplish this.

Each basic kit includes:

• Jabberwocky180 Frame, Hardware, and 3D Printed 15 degree PZ0420m Mount.
• Naze32 Presoldered with Breakout Cable
• 4x DYS 2205 2300kv Motors
• 4x DYS XM20A ESCs
• 12v/5v Filtered PDB
• 4x DAL 4045 Bullnose Props
• Optional FPV Kit (PZ0420m and MQB 200mw Raceband VTX)
• Presoldered XT60 and 14AWG Silicon Wire Pigtail
• Lipo Strap
• Standoffs for PDB and Naze32
• Buzzer
• Standard Male to Male Servo Cable

Optional Accessories (3D Printed TPU)

Click here for the full page of accesories

• GoPro Mount with Integrated Antenna Tubes (15° or 25°)
• Mobius/RunCam/Foxeer Mount with Integrated Antenna Tubes (15° or 25°)
• XT60 Mount
• Antenna Mount and Tubes
• ABS Motor Tilts (10°)
• VTX Antenna

Frame Features and Specifications

• Low Profile and Lightweight Design
• 177mm Motor to Motor (180 Class)
• 3.2mm Bottom Plate.
• 1.5mm Top Plate.
• 80g Including Hardware
• 30mm Nylon Hex Standoffs
• 10mm Steel Screws
• 28x28 FPV Camera Mount (32x32 not supported)
• Dip Switch Window for MQB Raceband Video Transmitter
• Low Profile and Lightweight Design
• Extended motor mounting area, keeping your motors safe from direct impacts.
• Motor mounting patterns for m2 and m3 motors (1306-2208).
• Metal screws and nylon standoffs, keeping the frame rigid and together, even in the worst crashes.
• Various 3D Printed Accessories
• Suggested Props: DAL 4045 Bullnose or, order in bulk and receive a discount with the Bulk Pack.

How to Build a Quadcopter

Mini FrSky D4R-II Antennas

$ 2.99 $ 5.00

Designed with Mini Quads in mind, these shortened FrSky Antennas are a plug and play replacement for the stock antennas on most FrSky Receivers, including the D4R-II and X4R Receivers.

Includes 2 Antennai

Length: 100mm

Connector: u.FL (same as stock antenna)

Micro MinimOSD

$ 6.99 $ 15.00

The Micro MinimOSD is the same MinimOSD that you love, with all it's features packed into a tiny, simple, and effective solution. 

• All the same features as the orignal MinimOSD, but at less than half the size
• NO DC/DC power conversion via 5 volts
• FTDI cable compatible pin-out
• Standard 6-pin ISP header
• Two LED indicators
• ATmega328P with Arduino bootloader
• MAX7456 monochrome on-screen display
• 15x15mm size board
• Modifications for direct connection of two batteries (up to 4S)
• Pad for an Analog or Digital PWM RSSI signal
• Pad for the connection of a Current Sensor
• ATmega328P with Arduino bootloader
• Standalone, or with APM/ Flip / Flip32+ flight controllers

• ATmega328P with Arduino bootloader
• MAX7456 monochrome on-screen display
• FTDI cable compatible pinout
• Standard 6-pin ISP header
• Two independent power sections with an LED indicator on each
• Solder jumpers for combining the power sections
• +5V 500mA regulator for up to +12V supply input
• Solder jumper for PAL video option
• Exposed test points for HSYNC and LOS
• Dimensions: 0.7"W x 1.7"L (2.4" w/ pins as shown) x 0.3"H

How to flash the Micro MinimOSD with MWOSD

Pre-Built ZMR250

$ 319.00

This includes the same components as the normal kit, but will be pre-assembled and tuned. 

Add the optional Taranis Radio and D4R-II Receiver, and I will bind and configure the radio and ZMR250.

If you would like motor tilts, or other 3D Printed parts seen in the photos, please email ahead of time. They are not included in the price.

Available PDBS:

Standard mini Afro PDB

12v/5v PDB (Recommended)

MQB JABBERWOCKY 180 Frame

$ 45.00

We'll be honest, the Jabberwocky is the best 180 FPV Racing Frame on the market. Legend has it, it will stop a baby from crying.

Current Cleanflight CLI Dump for the Jabberwocky 180 with the suggested components.

Inspired by polyhedron geometry, the Jabberwocky 180 is a cute little frame with a knack for not breaking. It’s true, we did the math

The Jabberwocky 180 was designed around the PZ0420m 28x28 size FPV camera and the MQB Raceband VTX, both of these FPV components will fit perfectly into the frame.

Fully protects 22xx size motors and remains the lightest frame in its class to accomplish this.

Included

• Top and Bottom Frame Plate
• 3D Printed TPU FPV Camera Mount for PZ0420m (Select 15° or 25°)
• 6x 30mm Nylon Standoffs
• 12x 10mm Steel Screw
• 4x m2 5mm Screw to Mount the FPV Camera
• Delicious Jolly Rancher

Optional Accessories (3D Printed TPU)

Click here for the full page of accessories

• GoPro Mount with Integrated Antenna Tubes (15° or 25°)
• Mobius/RunCam/Foxeer Mount with Integrated Antenna Tubes (15° or 25°)
• XT60 Mount
• Antenna Mount and Tubes
• ABS Motor Tilts (10°)
• MQB 200mw VTX
• VTX Antenna
• PZ0420m
• Shorty FrSky D4R/X4R Antennas

Frame Features and Specifications

• Low Profile and Lightweight Design
• 177mm Motor to Motor (180 Class)
• 3.2mm Bottom Plate.
• 1.5mm Top Plate.
• 80g Including Hardware
• 30mm Nylon Hex Standoffs
• 10mm Steel Screws
• 28x28 FPV Camera Mount (32x32 not supported)
• Dip Switch Window for MQB Raceband Video Transmitter
• Low Profile and Lightweight Design
• Extended motor mounting area, keeping your motors safe from direct impacts.
• Motor mounting patterns for m2 and m3 motors (1306-2208).
• Metal screws and nylon standoffs, keeping the frame rigid and together, even in the worst of crashes.
• Various 3D Printed Accessories to suit all your abusive needs.
• Suggested Props: DAL 4045BN or, order in bulk and receive a discount with the Bulk Pack.
• Suggested Motors DYS SE 2205 2300kv

12v/5v Filtered PDB for Mini Quadcopters

$ 15.00

This mini PDB is perfect for Mini Quadcopters and fits on the ZMR250 frame as well as the new Jabberwocky180

Features

• 3s-6s input
• 12v filtered output 500ma (1a with cooling)
• 5v filtered output 500ma (1a with cooling)
• VTX Input (5v or 12v)
• Camera Input (5v or 12v)
• OSD Input
• 12v/5v selectable via solder jumpers.
• Large ESC pads for easy soldering.
• 70a constant/110a urst current
• 36x36 formfactor (same as Naze32)

Mini Quad Bros 200mw 32ch Raceband VTX

Sold Out

Now with Raceband

This tiny 200mw 32 channel video transmitter has every standout feature we love, built into one package.

Fits perfectly into the MQB Jabberwocky 180 Frame

Features and Specifications

• Raceband channel separation.
• 200mw. Perfect for FPV Racing. Anything over 200mw, and you're stomping on other racer's feed.
• 32 Channel. The standard four frequency bands with eight channels each.
• 5cm 90° SMA extension. No more breaking the SMA connector on the PCB during a crash.29.99
• 6-24v (2s-6s) wide voltage input.
• PAL/NTSC acceptable (auto switching).
• 21*20*8mm form factor.
• 5g weight.

Frequency Band and Channel Chart 

Raceband in RED

Eachine FPV200 Kit for FPV Racing Mini Quadcopters (Plug & Play)

Sold Out $ 32.99

The Eachine FPV200 Kit a complete solution for adding FPV to your quadcopter.

Each FPV Kit includes a 200mw 5.8Ghz 32 Chanel Video Transmitter (VTX), a 700tvl FPV Camera, and a wire harness making everything plug and play, no soldering required. Just plug your 3s lipo's balance lead into the balance adapter to power the FPV Kit. If you want to run 4s, cut off the balance adapter, and solder the wires to your PDB. LEDs light up indicating which channel and frequency band you are currently on. To change the channel or band, simply press athe convenient button on the transmitter. Long press for band change, short press for channel change.

Lets talk specs:

200mw 5.8Ghz 32 Chanel Video Transmitter standard RPSMA Antenna Connector

700 TVL 110 FOV FPV Camera CMOS, 0.01lux. 32x32mm form factor fitting all mini quadcopter camera mounts.

Plug & Play with 3s Lipo

NTSC or PAL switchable (switch on camera).

Total system weighs in at 32g.

DAL 5x4.5 and 6x4.5 Bullnose and Regular Unbreakable Props for FPV Racing Mini Quadcopters

$ 2.99

A new contender on the propeller market, the DAL "unbreakable"  5x4.5 and 6x4.5 Props for mini quads and FPV Racing.

The DAL "Indestructible" Props are proven to be highly durable in crashes due to their composite construction materials and thick hub design. The DAL props are extremely well balanced.

Please select the size (5x4.5 / 6x4.5) and Bullnose or Regular, and the color you'd like!

We've got our hands on the newest 5x4.5 Bullnose and 6x4.5 Bullnose version and as always, these are custom packaged to include 2cw, and 2ccw to serve as a full set for a mini quadcopter.

Included:

2x CCW

2x CW

Review and Data Tests

Bulk Pack DAL 4045, 5045, and 6045 Props for Mini Quadcopters

$ 45.00

Be a hulk, buy in bulk. DAL 5x4.5 and 6x4.5 Unbreakable Props for a cool discount.

Bulk DAL 5x4.5 & 6x4.5 props, packaged with the user in mind. 

Each order includes 80 props (20 packs of 4pcs).

And each pack includes a full set of props for a mini quad, meaning 2cw, 2ccw.

DYS SE 2205 2300kv Hollow Shaft Special Edition

$ 15.99 $ 17.99

These are the new DYS 2205 2300kv uni-body design motors.

Pre-Soldered with Bullet Connectors to fit our DYS XM20A ESCs

• NMB Bearing
• N52 Magnets
• 0.2mm Iron Core
• M5 Hollow Shaft
• Replaced crappy C Clip with Screw
• 1x CW Motor
• 2x Nylock Prop Nut
• Wrench for tightening

Replacement Motors for the Mini Quad Kit

MQB 2204 3200kv 180 Race Motors

Sold Out

Designed specifically for use on 180 mini quad frames swinging 4" props.

Do not use Tri-Blade propellers on the motors in this kit, they are designed for Dal 4045 Bullnose Props (Dual Blade). Tri-Blade props will overamp the motor, ESC, or lipo.

Specifications & Thrust Data

• 2204 3200kv
• 3-4s capable.
• Presoldered 2mm bullet gold connectors

Includes

• 1x 2204 3200kv 180 Racing Motor
• M3 5mm Mounting Screws
• 2x Nylock Prop Nut, because we know you always lose one :)

Fat Shark Dominator V3 FPV Goggles

Sold Out

The Fat Shark Dominator V3: The Gold standard of FPV Goggles

The best FPV Goggles available, the Fat Shark Dominator V3 delivers the highest quality FPV experience possible.

Add a Race Band Receiver Module and Aomway CP Antennas for a complete package.

Included:

FatShark Dominator V3 Goggles

FatShark Battery

Carrying Case

Charging Leads

AV Cables

HDMI Cable and Adapter

Rubby Ducky Antenna

Lens Cloth

Naze32 Acro

$ 13.99 $ 20.00

A breakout cable and pre-soldered 90 degree header pins included with every Naze32 order.

The Naze32 is arguably the best and most affordable flight controller on the market. It's highly recommended for any drone racing platform due to it's fast 32-bit processor. Combine the Naze32 with Baseflight or Cleanflight configurator for best results.

The Acro Naze32 features battery voltage monitoring so you know exactly when your voltage is too low and it's time to land. Couple this flight controller with a FrSky radio system like the Taranis and you'll enjoy the plug and play telemetry output from the Naze32's FrSky Telemetry system. This works best with a D4R-II for small fpv racing drones. An onboard USB makes setup and configuration as simple as pie.

We also have your Naze32 mini quadcopter PIDS covered. Once you flash your board with the latest firmware, you can paste the settings from this file into the CLI tab. This will do most of the setup process for you. You may still need to adjust settings on the receiver tab, and disable or enable PPM mode depending on your radio system. These PIDS should have you locked in and ready fpv drone racing.

Download the settings here.

User Manual can be found here.

Direct Input Voltage Naze32

Sold Out

A new generation of the popular Naze32 board is now available. Offering a built in regulator allowing up to 6s direct input voltage providing power for itself. This eliminates the need for a UBEC or a 5v BEC on your ESC.

The 3-6s Naze32 allows for a simplified build process and a clean looking mini quadcopter.

 Available both unsoldered and presoldered with 90 degree pins.

Ships with 2x standard male-male servo cables. If you use PWM for your radio, you will need an additional 3-4 cables.

NEW DYS SN20A ESC Flashed with OneShot125 and Damped Light

Sold Out

The DYS SN20A is a new "KISS" alternative ESC

Fresh from the great minds over at DYS Technology. Now you can have a high performance, extremely small, and lightweight ESC for an affordable price. The DYS SN20A is quickly becoming the new standard and the most popular ESC among the pros.

When you buy a DYS SN20A ESC from us, it comes pre-loaded with BLHeli 14.3 with OneShot125 and Damped Light enabled. We also have the SimonK Bootloader installed.

Each ESC comes with Pre-Soldered 2mm bullet connectors. 

The DYS USB Linker allows you to change motor direction and other BLHeli settings with ease. Stock settings are shown below:

DYS SN20a Specs:

Supports Damped Light and OneShot125

2-4s input.

20A Output Current

2g (without wires)

23*12*4.5mm (freakin' tiny!)

Fast 500Hz Refresh Rate

DYS SN20A Test Flight

Full Carbon Fiber ZMR250 Frame

$ 25.99 $ 34.99

Full Carbon Fiber ZMR250 Frame Kit. The new design allows for both 1806 and 2204 mini quadcopter motors to be mounted without modification or drilling.

FrSky XSR Receiver

$ 24.75

The FrSky XSR is the smallest full range drone receiver.

Offering and small form factor, and both SBUS and PPM, the FrSky XSR is the best receiver for drone racing.

FrSky XSR Receiver Specifications:

• Dimensions: LxWxH: 26 x19.2x 5mm
• Weight:  4.3 grams (including cable)
• Channels: 16 (S-Bus) / 8(PPM)
• Voltage: 4 - 10V
• Current: 100mAh @ 5V
• Upgradeable Firmware
• Antenna:  90mm in length

NEW 2x Full Carbon Fiber ZMR250 Arm

Sold Out

Custom Order

$ 1.00

Jabberwocky180 HD Camera Tilts

Sold Out

GoPro, Runcam, and Mobius 3D Printed TPU tilts for the Jabberwocky180 frame.

Includes a 3D Printed TPU Tilt and Antenna Tubes for your RX Antennas.

XT60 Mount for Jabberwocky180

Sold Out

Jabberwocky180 Antenna Mounts

Sold Out

Keep your D4R RX Antennas safe with this Antenna Mount and Tubes for the Jabberwocky180

A simple solution to protect and increase reception for your RC Antennas.

Includes

• 3D Printed ABS Antenna Mount
• Antenna Tubes
• Nylon Mounting Hardware

DYS XM20A BLHeli V2 ESC 500Hz 3-4s Pre-Soldered Bullets

$ 11.00 $ 14.00

Includes a hard case to protect the ESC.

Pre-Soldered with bullet connectors to plug directly into our DYS 2204-2300 Motors

Replacement part for the Mini Quadcopter Kit